Oiltizer - July 1, 2022

www.oiltizer.com • Vol. 46, Issue No. 19 • July 1st, 2022 Toll Free: 1-800-255-7215 Fax: 405-605-5220 www.oiltizer.com Oiltizer® • Ag Ads® • Punch Press™ 800.255.7215 • Fax 405-605-5220 210 Park Avenue, Suite 1110 Oklahoma City, OK 73102 Contact us by phone, fax or e-mail to: Inquire about Advertising, Change Address Information, or Unsubscribe from our Mailing List. After first run, publisher does not accept responsibility for mistakes in ads.

2 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 (6) 2023 DOONAN SPECIALIZED 48’ STEEL CLOSED A/R FLATS DOONAN ALL STEEL A/R SLIDER FLATS, 12 SLIDING WINCHES ON DRIVERS SIDE, 1 - 48” ALUMINUM TOOL BOX ON DRIVERS SIDE, 11R 24.5 GENERALS ON STEEL WHEELS, PUSH - PULL AIR SLIDER, DOUBLE PIPE SPOOLS, APITONG FLOOR, BLACK IN COLOR, 1 - IN STOCK, NEXT ONES DUE OFF IN AUGUST FOR DELIVERY, Stk #149689 (3) 2021 KALYN SIEBERT 3 AXLE FORKLIFT LOWBOYS 3 AXLE FORKLIFT LOWBOY, DOVETAIL NO RAMPS NEEDED TO LOAD OR UNLOAD, 22’ WELL, GRADER RAMPS ON THE FRONT, 27” LOADED DECK HEIGHT, PRESSURE CONTROLLED DUMP VALVE, 15” GROUND CLEARANCE IN THE TRANSPORT POSITION , REAR STROBE LIGHTS, ALL BLACK IN COLOR, ALL IN STOCK IN LUBBOCK TODAY, Stk #100112,100114,100135 2006 MACK GRANITE CV703 ALL MACK COMPONENTS, CAMEL BACK SUSPENSION, 11R 24.5 ON DRIVES, 11R 22.5 ON NON STEERABLE LIFT AXLE, 425/65R 22.5 ON STEERS, CHROME FRONT BUMPER, ONE OWNER DUMP TRUCK, LOCAL TRADE ON TWO NEW WESTERN STARS, Stk #149424 2022 WESTERN STAR 49X BRAND NEW, F.E.T. PAID, 1.750 MILES, DD 16 - 600 HP WITH 2050# TORQUE, 12 SPEED AUTOMATIC,NEVER PULLED A LOAD, STEERABLE LIFT, LONG SLIDE FIFTH WHEEL, SINGLE 1/2” HEAVY FRAME,FACTORY INSTALLED PTO WITH RH SPLIT TANK ,LOADED UP NICE HEAVY HAUL, Stk #150262 2022 KALYN SIEBERT VERSA DECK 40 TON DROPS, WITH 7 SETS OF BUFFER BRAND SAND BOX CONTAINER TWIST LOCKS ( SHOULD FIT EVERY BRAND OF SAND BOXES OUT THERE), FIXED SPREAD, 10’6” TOP DECK WITH 18” PIN - 37’6” LOWER, IN STOCK TODAY, Stk #149119 (3) 2014 FREIGHTLINER CASCADIA 125 3 OF THESE MATCHED UP UNITS, PENSKE LEASE RETURNS, PERFECT FOR BELLY DUMP APPLICATION, TARE WEIGHT 16,240#, WITH NEW BELLY DUMP 29,640#, ALSO HAVE A 2015 MODEL SAME SPECS BUT WITH A DT 12 AUTOMATIC TRANS., ALSO HAVE FOUR NEW CPS BELLY DUMPS THAT ARE PICTURED, Stk #149905 (2) 2020 ASPEN T/A OILFIELD BOOSTER 2 - 20 TON TANDEM AXLE ASPEN BOOSTER SET UP FOR OILFIELD LOWBOY, CLAW STYLE CONNECTION, HYDRAULIC RELIEVING DOUBLE ACTING SHIMMING CYLINDERS, REAR STROBE LIGHTS, SKID PLATE PACKAGE LETS YOU SUCK UP, STK #144733 (2) 2017 FREIGHTLINER CASCADIA 125 EVOLUTION THIS WAS A PENSKE - UPS TRUCK, NEW STEER TIRES, GOOD REAR RUBBER, CHROME FRONT BUMPER, WE HAVE TWO OF THESE THAT ARE IDENTICAL SPECS, ALL ALUMINUM IS POLISHED OUT, Stk #149331 (3) POLE TRUCK BEDS pole trucks beds are 21 1/2 feet, pole trough, no poles, 104” inside pin width, 10” tail roller, toolboxes. Call for more details. 2016 TRANSCRAFT TL 2000 1 - OWNER, WE SOLD IT NEW, ALL STEEL, A/R SLIDER, 12 SLIDING WINCHES, DUNNAGE RACK, TOOL BOX, PIPE SOCKETS IN FLOOR WITH STAKES AND STAKE STORAGE, Stk #123957 2007 PETERBILT 379EXHD SS BREATHERS, TWIN STACKS, 17 GAUGES, T/T STEERING, RUBBER FLOOR MAT , 2 - A/R SEATS, Stk #149727 2022 SCONA DOUBLE SCHNABEL 13 AXLE TOWER SCHNABEL, PEERLESS 85 TON DOUBLE SCHNABEL, 6 AXLE STEER DOLLY, ALL ALUMINUM WHEELS, 275/80 R 22.5, SMOOTH ALUMINUM FENDERS ON JEEP GOOSENECK, ALL REMAINING AXLES WILL HAVE POLY FENDERS, BLACK, LATE OCTOBER DELIVERY, Stk #147735 (9) 2015 DOONAN TANK HAULERS DOONAN TANDEM AXLE TANK HAULING LOWBOYS, ONE OWNER, TIRE INFLATION SYSTEM, GOOD VIRGIN RUBBER, WILL HAUL 1 - 1,000 BARREL, 2 - 750 BARREL, OR 3 - 500 BARREL TANKS, 6’ - REAR PULL OUT, RH SWING OUTS TO HAUL LADDERS, REAR STROBE LIGHTS, ALL BLACK IN COLOR, IN STOCK IN LUBBOCK, Stk #149614,149607,149606 (2) 2020 ASPEN 4 - 5 AXLE 70 TON SCISSOR NECK, 108” WIDE, FRONT TWO LIFT AXLES, 46’4” DECK LENGTH, 10” TAIL ROLLER, PREPPED FOR FUTURE FLIP NECK, REAR LUGS FOR FUTURE CLAMP STYLE TANDEM AXLE BOOSTER, Stk #144730 2008 TRANSCRAFT DTL 2100 ALL STEEL, CLOSED TANDEM SET AHEAD JUST A WAYS OFF THE BACK END, 10’ TOP DECK WITH 18” PIN, 12 SLIDING WINCHES ON DRIVERS, FLOOR WILL BE REPAIRED, Stk #150199 2016 DURA HAUL LIGHTWEIGHT USED DURA HAUL BELLY DUMPS, ONE OWNER, ELECTRIC FLIP TARP, CHOICE, COME QUICKLY, STK #136624 2008 PEERLESS T/A JEEP TANDEM AXLE JEEP, SLIDING FIFTH WHEEL, RED, GOOD RUBBER, STK #147723 2022 DOONAN CLOSED T/A DROP ALL STEEL 48’ DROP, A/R CLOSED TANDEM SET ALL THE WAY TO THE REAR, 10’ TOP DECK, 38’ ON THE BOTTOM, 18” KING PIN, 12 SLIDING WINCHES ON DRIVERS SIDE, IN STOCK TODAY, Stk #148729 806-748-1529 CHARLIE SWAN cswan@lubbocktrucksales.com CODY KINSEY codykinsey@lubbocktrucksales.com JAMES GALLAGHER jamesg@lubbocktrucksales.com MIKE IDEN miden@lubbocktrucksales.com CHRIS SOTO chris@lubbocktrucksales.com 800-753-1552 TM 1 LEFT IN STOCK! 3 MATCHED OFFERS ACCEPTED 2 IN STOCK! 3 IN STOCK! 9 IN STOCK! 2 IN STOCK! 2 MATCHED AUG DELIVERY 1 LEFT IN STOCK!

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 3 5 DRILL RIGS • Spencer Harris 5,000 Drilling Unit P/B Detroit Series 60, 97’ Telescoping ...........................................$65k • IDECO H-44 1,000 HP Carrier Mntd. Rig Package, 117’H Telescopic Mast ............................$188k OBO • 1981 Challenger 360 Kelly Drive, 18” RT ........$395k • 2011 Loadcraft HRI 1,000-E Rig Hyd. Top Drive, SHL Mast w/1-1/8” Drill Line ...........................$285k • 2003 Taylor SS 5,000 P/B CAT C-15, RT Table, 60’ x 225,000 Lb Pullback Capacity ........................$195k TRIPLEX PUMPS • IDECO T-500 Triplex Pump P/B Detroit, Ser. 60 $46k • Maxum M1000 Triplex Pump P/B CAT 3508 Diesel Engine................................................................$37k • JAS 500W Triplex Pump P/B Allison Trans. .......$39k • HHF-1000 6 3/4” x 10” Triplex Pump (Chinese Built) $18k • RS-F1000 6 3/4” x 10” Triplex Pump ..................$18k MUD SYSTEMS • (2) 300 BBL Trailer Mntd. Mud Mixing System ................................................................. $43k Each • 300 BBL Skid Mntd. Mud Mixing System ..........$33k • 2010 NOV Rolligon Hydration Unit w/HPU .......$20k • 150 BBL/6300 Gal. Mud Mixing System ..........$188k LOWBOY TRAILERS • 2006 Kalyn Sierbert 4 Axle Trailer ....................$37k • 1900 Loadking 4 Axle Trailer ............................$35k • 1998 Talbert 6 Axle Trailer RGN ........................$50k • 2011 Trailking Trailer ....................................$34,500 Buy, Sell & Trade Pre-Owned Drilling Equipment We have a large inventory of used Drill Rigs, Air Compressors, Mud Pumps, Mud Mixing Systems, Trucks, Trailers, and any other support equipment you need! Hydraulic Start , Aliison 9820 Transmissions, Remote Box With Umbilical , FULLY TESTED Refurbished Frac Pumps For Sale GARDNER DENVER & SPM 2250’s, Multiple Available AVAILABLE WITH: . Custom Paint Job . Air start Conversion . On board boost pump Contact us today! 713-641-6006 • www.boatmanInd.com 7355 Airport Blvd. • Houston, TX 77061 Pump: 2019 Gardner Denver Engine: 2250HP Cummins QSKTA50 Plunger Size: 4.5”

4 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 5 5

6 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 WORK SAFER AND SMARTER For more information, visit www.PETOL.com 254.675.8651 | sales@petol.com | Clifton, Texas PETOL™ POP-IT™ Flange Spreader & Prying Tool » Use to separate stubborn flanges » Eliminate the need to hammer wedges or use pry-bars » Powerful and easy to use » 2 sizes spread up to 5-1/4" and 8-1/2" PETOL™ Flange Aligning Tools » Eliminate the hazard and hassle of hammering drift pins » 18 sizes to fit 150 lb. to 2500 lb. flanges » Smaller sizes and longer lengths also available » Sold individually and in sets GEARENCH™ is now PETOL™ LEGENDARY RELIABILITY SINCE 1927 PETOL™ Flange Lifters Patent #8,434,800 and #8,434,801 » Use to move separated flanges » No lifting eye required » Suitable for blind and weld neck flanges » 5 sizes available

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 7 5 CALL TOLL FREE: 1-855-332-0500 or e-mail: dave@easternsurplus.net Eastern Surplus & Equipment Co. www.easternsurplus.net ARE YOU TIRED OF GETTING STUCK IN THE MUD? Let our ALL WHEEL DRIVE MILITARY TRUCKS help you out Supplying TRUCKS and PARTS for your Military truck fleet. Custom built trucks offered to meet your requirement. Call or email for a quote. Plow trucks, Tractors, Cab & Chassis, Dump trucks & MORE! WORK SAFER AND SMARTER Place wrench on nut and thread retainer onto stud. For more information, visit www.PETOL.com 254.675.8651 | sales@petol.com | Clifton, Texas GEARENCH™ is now PETOL™ LEGENDARY RELIABILITY SINCE 1927 PETOL™ HAMMERTIGHT™ Wrench Retainer Patent #9,079,300 PETOL™ HAMMERTIGHT™ Wrench Retainers are safe and easy-to-use tools designed to hold a striking wrench on a nut for a safer, hands free, one man operation. The HAMMERTIGHT tool easily threads onto the stud. A spring loaded plate enables the wrench to be repositioned on the nut without removing the retainer. » Suitable for use with all brands of 6-pt. and 12-pt. straight or offset wrenches » Imperial and Metric sizes available » Surface coated for rust protection » Sold individually and in sets Pumps also available in 350 thru 2250 horsepower. New fluid ends for many style pumps including: - Aftermarket - BJ Pacemaker & Parts Oilwell SA-640 & 644-5 & Parts Western RR500 & Parts OFM PUMP INC. OFM MODEL 600S Triplex Well Service Pump 600 horsepower for lightweight and high performance for acidizing, cementing-capable of mounting back to back RATED BRAKE HORSEPOWER ................................................ 600 MAXIMUM ROD ................................................................ 100,000# STROKE LENGTH.......................................................................6 in. PLUNGER DIA. in.................................................. 2-3/4" thru 4-1/2" GEAR RATIO .............................................................................. 4.6:1 WEIGHT..................................................................................... 4500# OVERALL LENGTH............................................................... 51-1/8" OFM PUMP INC. ODESSA, TX. Phone: 432-381-7390 Fax: 432-385-1205 www.ofmpump.com TOLL-FREE 877-381-7390

8 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 BUCKING UNITS: HANDLING TOOLS: • Elevators • Slips • Spiders • Safety Clamps • Rod Tools MOT offers a full range of Hydraulic Power Tongs used for: • Well Service • Workover • Snubbing • Completions • Casing Running • Drill Pipe DIES & INSERTS: POWER TONG PARTS for: SLIP FLEX HANDLES for: DRILLING & WELL SERVICE RIG RELATED EQUIPMENT OILFIELD EQUIPMENT • OIL TOOLS • RIG PARTS & EXPENDABLES Model: UFRC (Unitized) TORQUE TURN SYSTEMS: DEMCO® / WECO® STYLE BUTTERFLY VALVES: DEMCO® STYLE DM GATE VALVES: 1-832-909-0128 • www.m-o-t.com 10200 Hempstead Rd, Suite 2I Houston, TX 77092 • Email: sales@m-o-t.com Varco® SD, DC, CMSXL, Woolley® A, B & C-1 Baash-Ross® UC & DU (TEDA®, Oil Country®, Foster ®, BJ®, Hillman Kelly® and Weatherford®)

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 9 5

10 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 11 5 /), 4//, $)6)3)/. #OMPLETE ,INE OF 0RODUCTS &OR /IL 7ELL #EMENTING )25 352'8&7 ,1)250$7,21 &$// 25 :5,7( &!8 WWW IRI OILTOOL COM :H 1RZ $FFHSW &UHGLW &DUGV 6 0HULGLDQ ‡ 2.& 2. 3 2 %R[ ‡ 2.& 2. #%-%.4).' (%!$ 2%'5,!2 &,/!4 %15)0-%.4 &,!00%2 490% &,/!4 %15)0-%.4 !54/-!4)# &),, 50 &,/!4 %15)0-%.4 ).3%24 %15)0-%.4 #!3).' 37)6%, ().'% 490% #%.42!,):%23 ,!4#( $/7. 0,5' "!&&,% 25""%2 #%-%.4).' 0,5' -5,4)0,% 34!'% #%-%.4).' #/,,!2 #%-%.4).' "!3+%4

12 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 13 5 OKC Products, Inc. Contact for more information OKC Products, Inc. (970) 532-1774 okcsales@okcproducts.com PumpMate™ XT TimeMate™ XT NEW – TripMate™ Wireless Plunger Arrival Sensor 4”x4”x3” 6”x6”x4” LinkMate 4x Receiver PumpMate XT 1x Receiver OR Touch Sense Keypad Custom Programming LCD Contrast Control Integral Solar Panel Extended Battery Life microSD Data Logging 24/7 Reliability Certified Intrinsically Safe for use in Class 1, Division 1, Group C and Group D Hazardous Locations NEW Multi-Purpose Controllers • A Solenoid Valve • A/B Solenoid Valves • Four (4) Digital Inputs • Three (3) Analog Inputs • Serial Rs-232/RS-485 • Wireless Connectivity • Modbus RTU Slave • Remote Access Apps • Single Solenoid Valve • Four (4) Digital Inputs • Three (2) Analog Inputs • External Sensor Hookup PN: 9306-3061000 PN: 9307-3071000 Wireless Option Module: • Bluetooth Transceiver • 500 ft. LOS Range • Power Switch • Connect Test Mode • Switch ID Selection • Integral Solar Charger TripMate™ 2012 Features • 2-Wire (GND, SIG) • 3-Wire (+V, GND, SIG) • Internal Battery • … 10 year battery life • Wireless Option • … 500 feet range

14 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 )$; ZZZ KDUORZVDPPRQV FRP HPDLO KDUORZVDPPRQV#PVQ FRP $QGUHZV +LJKZD\ 2GHVVD 7; 53%$ %15)0-%.4 ). 34/#+ 37)6%,3 42!),%2 -/5.4%$ ). 34/#+ 37)6%,3 3+)$ 42!),%2 -/5.4%$ ). 34/#+ 4%% #!4 #5--).3 ). 34/#+ 0!( #!4 $%42/)4 ). 34/#+ /0) $%42/)4 0/7%2 ). 34/#+ #!4 */(. $%%2% ). 34/#+ 0: 7 0: 7 3%26)#% $%0!24-%.4 7E 3ERVICE 7HAT 7E -ANUFACTURE 0LUS /THERS (OUR 3ERVICE 7ITH %XPERIENCED -ECHANICS !ND %QUIPPED 3ERVER 4RUCKS #OMPLETE (YDRAULIC 2EBUILD 3HOW 7ITH 4EST &ACILITY (!2,/7 3!--/.3 OF /DESSA HAS BEEN SERVING THE OILÜ ELD INDUSTRY SINCE 7E SPECIALIZE IN PACKAGING WELL SERVICE PUMPS SWIVEL UNITS 05-0 0!#+!'%3 'ARDNER $ENVER 4EE 0!( (0 .ATIONAL .EW 5SED 2ENTAL #%-%.4 0!#+!'%3 4RAILER /R 3KID -OUNTED #EMENT 5NITS 7ITH 4O (0 0UMPS 7ITH 2ECIRCULATOR #!4 #UMMINS /R $ETROIT 0OWER 0/7%2 37)6%,3 4RAILER /R 3KID -OUNTED 0OWER 3WIVELS &ROM 4O 4ON .EW 5SED -5$ 0)43 &5,,9 34/#+%$ 0!243 $%0!24-%.4 (/3% 3(/0 #OMPLETE ,INE /F 0ARTS &OR !LL 3WIVELS 7ELL 3ERVICE 0UMPS .EW 2EBUILT (YDRAULIC 0UMPS -OTORS &5,, 3%26)#% -!#().% 3(/0 3TATE /F 4HE !RT #.# -ACHINES -ANUAL -ACHINES 3PECIALIZING )N 7ELL 3ERVICE &LUID %ND #HAINCASES 3WIVEL 0ARTS 0UMP 0ARTS

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 15 5 Hadco International Machinery & Equipment Brokerage Services 936-760-1220 trena@hadcointernational.com www.hadcointernational.com RIG 1 1500 HP SCR RIG 3 1000 HP MECH RIG 2 1300 HP RIG 4 1000 HP MECH Seller's Asking Price: $5,200,000 USD ALL INQUIRIES AND OFFERS ARE ENCOURAGED AND WILL BE CONSIDERED We have a great client offering an attractive 4 rig package to add to your fleet! By your preference, please call or email for additional information. Happy 4th of July! SAFE, EASY & EFFECTIVE For more information, visit www.PETOL.com 254.675.8651 | sales@petol.com | Clifton, Texas GEARENCH™ is now PETOL™ LEGENDARY RELIABILITY SINCE 1927 New Addition to the Product Line! Rod Transfers with Springs PETOL™ Suckerod Transfers PETOL™ SUCKEROD TRANSFERS enable rig workers to easily transfer pulled sucker rods to and from the racking platform. These sucker rod transfers are made from alloy steel for strength and durability. Transfers with springs keep safety ring in closed position until manually raised. Patent Pending Patent Pending

16 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 17 5

18 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 19 5 2 16-3/4 x 10M CAMERON TYPE U SINGLE BOPS 1 16-3/4 X 10M CAMERON TYPE U SINGLE BOPS 1 – SET OF BLIND RAMS 2 - SETS OF 5-7/8” RAMS 4 – SETS OF 5-1/2” RAMS 3 - SETS OF 5” RAMS 1 – 7-5/8 CASING RAMS 1 – 11” CASING RAMS 1 – SET 9-5/8 OR 9-7/8” RAMS 1 – SET OF 13-3/8” RAMS 1 11” 10/15M GK Hydril Annular BOP 1 11” x 15M Cameron Type “U” Double BOP 1 11” x 15M Cameron Type “U” Single BOP 2 2-3/8” Pipe Rams F/11” x 15M BOP 1 2-7/8” Pipe Rams F/11” x 15M BOP 2 3-1/2” Pipe Rams F/11” x 15M BOP 1 4-1/2” Pipe Rams F/11” x 15M BOP 4 5” Pipe Rams F/11” x 15M BOP 2 Blind Pipe Rams F/11” x 15M BOP 1 11” x Shear Blind Rams 1 11” x 15M Spacer Spool SCOTCO INC. 902 N. LARRIVIERE RD. • BROUSSARD, LA 70518 337-501-1683 CELL SCOTTY@SCOTCOPIPE.COM DRILL PIPE 1,349 jOINTS USED 3-1/2 13.30# S-135 NC38 W/HB 372 JOINTS NEW 4” 14# S-135 NC-40 NO IPC OR HB 894 JOINTS USED 4” 14# S-135 NC-40 W/HB 251 JOINTS USED 4” 15.70# X-95 NC-40 W/HB 1,000 JOINTS NEW 4” 14# S-135 GPDS 38 W/HB 1,200 JOINTS USED 4’ 14# S-135 GPDS 38 W/HB 710 JOINTS USED 4” 14# S-135 XT39 W/IPC & HB HEAVYWEIGHT 21 JOINTS USED 3-1/2 HEAVY WEIGHT NC38 HB 80 JOINTS USED 4” HEAVY WEIGHT NC40 W/HB 19 JOINTS USED 4” SPIRAL WEIGHT NC-40 W/HB 41 JOINTS USED 4” XT39 SPIRAL WT. W/HB 512 JOINTS USED 4” XT39 HEAVY WT. W/HB 46 JOINTS NEW 4” XT39 HEAVY WT. HB W/CERTS 25 JOINTS USED 4-1/2 HEAVYWEIGHT NC46 W/HB 35 JOINTS USED 4-1/2 SPIRALWEIGHT NC46 W/HB 75 JOINTS NEW 4-1/2 SPIRALWEIGHT NC46 W/HB 18 JOINTS USED 5” HEAVYWEIGHT NC50 W/HB 131 JOINTS USED 5” SPIRALWEIGHT NC50 W/HB DRILL COLLARS 35 JOINTS USED 3-1/8 X 1-1/2 X 2-7/8 PAC SPIRAL 9 JOINTS USED 3-1/2 X 1-1/2 X 2-3/8 IF SLICK 10 JOINTS USED 4-3/4 X 2-1/4 X NC38 SPIRAL, SLIP ONLY 191 JOINTS USED 4-3/4 X 2-1/4 X NC38 SPIRAL,1/2 SLIP ONLY 24 JOINTS USED 4-7/8 X 2-1/4 X XT39 SPIRAL SLIP ONLY 9 JOINTS USED 6-1/2 X 2-13/16 X NC46 SPIRAL, SLIP ONLY HB 11 JOINTS NEW 8-1/4 X 3” X 6-5/8 REG SPIRAL,ZIPPED W/HB 1 JOINT USED 8-1/4 X 2-13/16 X 6-5/8 REG. SPIRAL, SLIP W/HB TUBING PO 7017 125 JOINTS NEW w/certs 1-1/4” 3.02# P-110 TSHP (CS) 30 JOINTS NEW w/certs 1-1/2” 4.19# P-110 NTS 8 (CS) 41 JOINTS USED w/certs 1-1/4” 3.02# P-110 TSHP (CS) 560 JOINTS USED 3-1/2” 12.95# P-110 PH6 FOR SALE OR RENT

20 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 DD 58-93-2-R® POWER TUBING TONG is smaller, lighter and faster than the Foster 5893R. The DD 58-93-2-R is capable of gripping tubulars from 1 5/16" to 7"o.d. D&D TONGS POWER TONG SALES AND SERVICE FULL INVENTORY OF TONG PARTS • 250, 350, 500 Ton Spider/Elevators • 13-3/8 200 Ton Spider Bowls • HYC, MYC, YC, YT, MYT Elevators • 20" Tong, Bowl, and Slips • Extension Bails RANDY DAVIS e-mail: randyddtongs@aol.com PHONE: (325) 665-1861 PO Box 191 • Abilene, TX 79604 ALLEN GANN Office: (325) 677-5999 e-mail: allenddtongs@aol.com PHONE: (325) 725-7036 375 T&P Lane • Abilene, TX 79602 IN STOCK: NEW EQUIPMENT -D&D-58-93-2-R -STANDARD & HIGH TORQUE CASING TONGS -FOSTER & CROWN 5893R -TUBING SPIDERS, B, C,CHD,E, & INSERTS -FOSTER 74-92 -TONG JAWS, DIES, REPLACEMENT PARTS -BJ, CROWN RSX -TUBING & CASING ELEVATORS -OIL COUNTRY TUBING & ROD TONGS -HANDLING TOOLS, SAFETY CLAMPS -PECK-O-MATIC -ROD HOOKS, ELEVATORS, & TRANSFERS INVENTORY REDUCTION-PACKAGE DEALS!!! CROWN RSX & CHD TUBING SPIDER-$13,000.00 CROWN 5893R & CHD TUBING SPIDER-$18,000.00 WE ALSO PROVIDE RENTAL SERVICES: TUBING AND CASING TONGS, POWER UNITS, HANDLING TOOLS ACTIVELY BUYING CASING EQUIPMENT SUCH AS: 58-93-R 58-93-2-R www.ddtongs.com

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 21 5 • JCPump units are engineered and built in the USA, including our exclusive, heavy-duty gearboxes • We manufacture the gearboxes completely in our own machine shop to ensure the highest quality standards are achieved. • Every JCPump jack is designed with over 50 years of experience in pumping unit manufacturing • We distribute JCPump units all over America from our centrally-located headquarters in Southeast Kansas Compare us to the competition. No other company offers as much value. SIZES 10D THRU 40D Ph 620-251-9391 • 620-251-9800 www.jcpump.net • sales@jcpump.net Take advantage of our over 30 years of building and servicing HydrostaticTubingTest Trucks SAFE, EASY & EFFECTIVE PETOL™ Flange Lifting Shackle Patent #10,703,611 PETOL™ FLANGE LIFTING SHACKLES are designed to securely attach to blind and weld neck flanges providing a safe and effective method of installation or removal in both construction and maintenance operations. No lifting eye is required. The tool attaches to the flange with ease and automatically adjusts to the bolt hole spacing. The workpiece can then be safely lifted by a crane, hoist or other lifting mechanism. » Complies with ASME Specifications B30.20 and BTH-1, Design Category B, Service Class 4 » Stamped with Load Rating and serial number » Supplied Data Book contains operating instructions, warnings, load test certificates and MPI certificates For more information, visit www.PETOL.com 254.675.8651 | sales@petol.com | Clifton, Texas Threads adjacent to the head of the flange screw engage directly into the shackle body. GEARENCH™ is now PETOL™ LEGENDARY RELIABILITY SINCE 1927 Alternative lifting tools can be found on our website.

22 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 Canadian owned and operated, Rykar Industries specializes in manufacturing well service and auxiliary equipment. Providing top quality equipment to top quality oilfield companies. Rykar is well renowned as a NSM/WMI Oilfield Equipment Manufacturer affiliated with AMVIC, CTEA, CAOEC & MHSA Ph: 403-358-3500 • Fax: 403-358-3558 • Website: www.rykar.ca 2008 Sterling LT9500 Truck - Pump Hoist Pump Hoist (Water Well Hoist): 19,838 kms. 275” WB p/b Cat C13 Diesel Engine, Allison 6 Spd Auto Transmission, PTO, Air Ride Suspension, Steel Flatbed w/1400 gal Water Tank, 3’ x 9” H Side Rails f/Monorail w/Hyd Pipe Clamp p/b Lesson 5 HP Elec Motor, 47’H Hyd Raise Boom rated at 20,000# static w/BRADEN Hyd Winch, WARN 8000 Jib Elec Winch, (2) Hyd Outriggers, Wireless Remote, Break out & Spinner Controls. 2,022 Hrs 425/65 R22.5 Front & 11R 24.5 Rear Tires 2020 Rykar Rebuilt 4 Axle Carrier - New single man cab - Rebuilt Series 50 Detroit Engine - HT750 DB Rebuilt Allison Transmission - SJ300 Rebuilt Pump - 5” Plungers - 3 x 4 Charge Pump - 7 Valve manifold c/w check valve, 5000 PSI Guage - DP - 30 Winch to suck on tank - Texas style deck - 30m3 Rig Tank totally rebuilt; Line pipe c/w 602 unions Ready for Paint!

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 23 5 IN STOCK AND READY FOR IMMEDIATE PICK-UP DOG HOUSES! OK Truck & Trailers Sales, Inc. 1300 East Reno Ave • OKC, OK 73117 (866) 888-4697 Toll Free • (405) 232-1200 Local ASK ABOUT OUR DELIVERY We custom build Doghouses and Lab Trailers! Lots of other trailers in stock & available, call for details! Doghouse $9,250 7’ Wide x 7’ Tall x 12’ long, 2 windows, side door and rear door, Fully insulated, Propane tanks with 20k BTU wall heater, 4 large lockers, work desk, storage boxes, Elec package, White vynal walls A family owned & operated business in OKC, Oklahoma who deals in all sorts of trailers. We specialize in Doghouse, Trash and Equipment Trailers. We sell single axle to Tandems, bumper pulls to Goosenecks. Just call us Toll Free or check us out on the web @ www.oktruckandtrailer.com for all your trailer needs! Custom with Lockable Boxes Lab Trailers Office / Lab Trailers

24 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 APPRAISALS/CONSULTANTS BUSINESS OPPORTUNITIES continued COMPRESSION continued DRILLING & WORKOVER RIGS continued ARTIFICIAL LIFT BUSINESS OPPORTUNITIES CASING CEMENTING/ACIDIZING CIRCULATING EQUIPMENT COMPRESSION DRILL STRING DRILLING & WORKOVER RIG DRIVERS & PRIME MOVERS DRILLING & WORKOVER RIGS COMPONENTS ELECTRICAL EQUIPMENT 29,000' of 1-1/4" fiberflex rods & subs 12,500' of 1" fiberflex rods & subs Brammer Pipe & Steel, Inc. 940-665-4807 ACRES OF PUMPING UNITS, PARTS, GEARS, AND GEARBOXES Specializing in hard to find parts. See our ad in the Pumping Units Category. Harrelson Equipment 940-636-1984 BUYING 8" STROKE AJAX complete units OR cylinders only 8" to 14" cylinder bores C30-DPC81 contact STEVE 361-946-1066 americancompressor@yahoo.com Buying Ajax Gas Compressor Units C 30 thru DPC 360, Partial and Damaged Units considered, and compressor cylinders. Call Steve @ 800-888-0587 E-mail address is americancompressor@yahoo.com Double Pump Cementer - 2 1849 GASO pumps, NEW 20 bbl displacement tanks. NEW air valves and actuators. Bulk Truck - 200sk Capacity $45,000 OBO for both units! (270) 378-6444 1350/350 Foam Air unit Cat Engine & Kerr Pump Under 1100 Hrs Priced to Sell. 940-393-0911 Bridgeporfishing1979@yahoo.com Transload Facility & Equipment for Sale - 10 S&A Transloaders powered by Duetz diesel motors-2 scales with fall protection-2 Skytracks-1 Skidsteer -Work truck with welder and air compressor -Water truck-Scale house 3364 Gabo tri pump with 2.5” ceramic plungers with oiler on top (7) electric motors 3 phase (1) emsco pump jack #25 Bill Bingham 918-693-1685 Hadco International LLC Appraisals & Consulting Services specializing in oilfield appraisal and analysis from State Certified General Appraisers offering unbiased valuations of complex properties ranging from: Land Drilling Rigs, Offshore Drilling Rigs, Well Service Rigs, Land Production Equipment, Offshore Production Equipment, Pipelines & Refineries, Transportation Assets, All Oilfield Related Equipment, Aircraft. For more information, contact Duke W. Coon, State Certified General Appraiser & Certified Machine and Equipment Appraiser. For confidential discussions or quotes: call (936) 760-1220 or visit www.hadcointernational.com WANT TO BUY OILFIELD RELATED COMPANY COMPLETE WORKING BUSINESS WITH REAL ESTATE OR SURPLUS INVENTORIES - DRILLING, WORKOVER, WELL SERVICE, RENTAL & FISHING TOOLS, SUPPLY STORE, TRUCKING, CONSTRUCTION, OILFIELD MANUFACTURING, PIPE, DRILL BITS. RENE HENDON 800.281.1161 OR 281.260.0880 FAX: 281.260.0770 WANT TO BUY OILFIELD RELATED COMPANY COMPLETE WORKING BUSINESS WITH REAL ESTATE OR SURPLUS INVENTORIES - DRILLING, WORKOVER, WELL SERVICE, RENTAL & FISHING TOOLS, SUPPLY STORE, TRUCKING, CONSTRUCTION, OILFIELD MANUFACTURING, PIPE, DRILL BITS. RENE HENDON 800.281.1161 OR 281.260.0880 FAX: 281.260.0770 CACTUS COMPRESSION INC. CYLINDERS Ariel JGE, JGK, JGC, & JGD cyls. (new & unused) with numerous bore sizes from 6.25 - 17.875" COMPRESSORS Ajax DPC540 w/ (2) 9.5 YKIIEA Ajax DPC360 12 YK11F x 6 YKCA Ajax DPC360 13 x 10.5 x 6 YK11EAT Ajax DPC360LE 10.5 x 6 Ajax DPC300 8 YKDA x 5.25 YKCA Ajax DPC280 with (2) 5.25 Ajax DPC280 with (2) 9.5 YK11EA Ajax DPC280 12 YK11F x 5.25 YKCA Ajax DPC280 9.0 x 5.25 Ajax DPC230 15 YK11G X 8 YKDA Ariel JGH4 w/ (2) 13.5 x 11.5 x 6.375 frame only Cat 3612 - Ariel JGD6-3 (2) 20.125 x (2) 13.625 x (2) 9.625 Cat 3516TALE - FE565C-4 (2) 13.5 x 9.5 x 6 Cat 3516TALE - E504 (2) 14.5 x 9.5 x 6.25 Cat G3516-FE565-2 10 x 7.5 (parts only) Cat G3512TALE (engine only) Cat 398 TAA - FE565-2 16.5 x 9.0 Cat G398TA - JGR4-3 9.75 x 7 x 4.625 Cat G398 NA - FE650 7.5 x 5.25 Cat G398 NA - FE550 6.25 x 5.25 Cat G398NA - JGW4-3 w/ (2) 9.25 x 7 x 4.25 Cat G3408TA - Ariel JGJ-2 13.5 x 8.0 Cat G3408TA - Ariel JGJ-2 5.125 x 4.625 Cat 379TAA-FE550 6.25 X 5.0 Cat G379NA - KOA-2-3 8.25 x 6 x 3.5 Cat 342NA - Ariel JGR2-2 5.5 x 3.875 Cat 3304 - Sullair PDX-16 Cat 3304 - Gemini MPD-2 5.0 x 3.0 Cat 3304 - Ariel JGM2 5.125 x 2.75 40 Hp Elec Ariel JGP1 5.75 X 2.75 450 Hp Elec Ariel JG4 (2) 8.5x (2) 5.125" Wauk 330-Ariel JGP-1-2 with 7.5 JGM Wauk 330 - Gemini MPC 4.375 x 2.5 Wauk 1197-Ariel JG2-2 6.5 x 3.625 (2 available) Wauk 3521 - EI FE-665 8.75 X 6.25 Wauk 7042G - EI 6FE-065 11 x 6.5 Wauk 7042G - MW64 15 x 9.5 x 7 Wauk 7042GSI-Ariel JGK-4 (2) 6.75 x (2) 5.375 Wauk 7042GSI-Ariel JGK 4-2 (2) 8.375 x 7.875 Call Tom McNeill Cell 713-248-1512 www.cactuscompression.com 2 3/8", 2 7/8", 3 1/2", 4", 4 1/2", 5", 5 1/2" DRILL PIPE 20, 30 & 40 FT LENGTHS, DRILL BITS, BIT SUBS, DRILL COLLARS, STABILIZERS, RENE HENDON - WE BUY SURPLUS & USED INVENTORIES. 800.281.1161 OR 281.260.0880 FAX: 281.260.0770 WANT TO BUY WORKING DRILLING OR WELL SERVICE COMPANY - COMPLETE WITH REAL ESTATE OR SURPLUS INVENTORIES, RIGS, RIG COMPONENT PARTS, BLOCK, HOOKS, ELEVATORS, HANDLING TOOLS, POWER SWIVELS, MUD PUMPS, POWER TONGS, DRILL PIPE & COLLARS. RENE HENDON 800.281.1161 OR 281.260.0880 FAX: 281.260.0770 Ready to Drill Refurbished 1975 Gardner Denver 1500 HD with air, on 75 International, Nice Rig. Must Sell, Make Offer Call 903-326-4851 For Sale: Arrow 106, New style Gas engine Electric start Engine with volume tank. 13 in stock Call for price Cook's Engine Service 432-337-1975 - Todd office PUMPING UNIT GEARS: Replacement Herringbone Gears and Pinions for most brands and sizes of pumping units. Highest Quality – Competitive Prices. Most gears in stock. PETOL-GEARENCH, serving the oilfield since 1927. Call 254-675-8651. Clifton, TX. Oteco Products For Sale -Priced to Sell 1. Model 72 Minor Repair Kit Std Svc; 4- 3" Model 72 Gate Vlv w/2" BW; 1- 4" Model DM Gate Vlv Asy; 1- 4"x5" Model DM Gate Vlv 7500; 4- 2" x 3" Minor Repair Kit Model 28 38; 2- 2" x 3" Major Repair Kit; 4- 4" & 5" Minor Rep Kit Model 48; Call Double EE Svc 1800-932-8803 Opt 1; email russell@doubleee.com 1000' Mayhew mounted on a 1974 International Loadstar. 5 X 6 Gardner Denver mud pump. 2 - 4" drill collars. 400' of 2 3/8" drill pipe. 1 - 10" surface bit. 11 new button bits ranging from 7" down to 6 1/8". Last worked Nov. 2019. $32,000. Call 620-642-2039. I have (7) Waukesha- Quincy compressor packages, (1) Gemini engine, several Waukesha engines, all are rebuilt and ready to sale. Located in Great Bend, Kansas. Call Rick Kasselman @ 620-639-0311 or Email: kasselmanindustrial@gmail.com -Office and 3 parts buildings -All the spare parts and tools to fix anything Located in Thomas, OK capable of moving 7,000+ tons/day. Also includes a location in Elk City, OK with 26 railcar spaces available and 1 scale. Both facilities are serviced by Farmrail and available to accept unit trains or manifest from either the BNSF or the UP. Serious inquiries call Kyle at 580-339-3551 • 5 Axle Carrier 600 HP Detroit 5660 Auto transmission. 2008 Service - King 315 single drum w/ Parmack 104' 250,000 derrick. 12' sub, 17-1/2 rotary table. Complete drilling rig w/ pump, pipe, collars, (3) pipe tubs, pits, water tank & dog house's, hydraulic breakout, (3) hyd-winch on deck, (2) type B tongs. • 1981 Speed-Star SS-40 3 drum drill, Vin# B402-4 mounted on 3 axle trailer, w/ 18" R-table, pulldown hydro-matic brake, 6 part lines on Trip & Kelly. 6-71 Detroit, 3" plumbing & swivel hex kelly w/ roller bushing, 63' derrick refurbished 8/1/2021. Rig is complete w/14" pump Cat power, 4-1/2" 16.60 drill pipe, 4-6" drill collars, elevators, slips, LF tongs, hydro-breakout. • (2) 28L BE Drill Rigs w/JD diesel. • (1) 60L BE Drill. • (1) 24L BE Drill. • (2) 22W BE Drill w/ diesel power, 3 Leveling hydro. • ( 1 ) 28L BE Drill Rig w/o derrick "parts". • Ideco 71/4" X 15" 353 Cat w/air clutch power ................................... $20,000 • 214P Oilwell, Power 353 Cat w/clutch $20,000 • Ellis-Williams 7 1/4" X 16" Power 379 Cat. $20,000. This pump is in a 12' X 20' house on a master skid • 2- 1300 Emsco W//2 1000hp motors on each pump .............. $40,000 each • Cable Tools from 4" - 28" - rope sockets, Jars, Stems, Mud Buckets, Wrenches, Circle, Jack. • 1978 12T Smeal mounted on 1978 2050 IH w/ OT 466 engine, tandum axle, long tower. • #10 Jesina Pull Rig mounted on 1988 Ford diesel. • 36L Sanderson-Cyclone combination rotary & spudder mounted on 94 Ford all-wheel drive diesel carrier. Photos & prices available on request: Contact Jim Ewers @ 918-559-2726 AEK Enterprise LLC or email patewers@aol.com Air-Operated Double Diaphragm Pump 2-InchLM6 Aluminum/Buna/NPT, Texas Distributor, LM6, Industrial Quality. $990 Call 832-301-3959. SS and PP available most sizes, New. Air Industrial Works - Houston, TX THE LARGEST CLASSIFIED SECTION IN THE PETROLEUM INDUSTRY w *%< Submit Ads On The Web: www.oiltizer.com or by E-mail: classified@oiltizeronline.com 0LQLPXP FODVVLILHG UXQ LV FRQVHFXWLYH LVVXHV &ODVVLILHG DGV DXWRPDWLFDOO\ UHQHZ DIWHU LVVXHV XQOHVV DGYHUWLVHU QRWLILHV VWDII 3(5 ,668( 5$7(6 0LQLPXP FKDUJH RI SHU LVVXH IRU DGV ZLWK ZRUGV RU OHVV (DFK DGGLWLRQDO ZRUG RYHU LV d SHU ZRUG &RXQW ZRUGV LQ QDPH DQG DGGUHVV &RXQW JURXSV RI QXPEHUV DV RQH ZRUG EXW LI PRUH WKDQ VL[ FRXQW DV WZR ZRUGV 6SHFLILHG OLQH FKDUJH RI

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 25 5 GEARS GENERATORS continued MISC. PIPE - OCTG continued PIPE - OCTG LEASES LUMBER HOT OIL UNITS GENERATORS OIL RENTALS PIPE Industrial Diesel, Inc. 817-232-1071 Office Building one story Stand alone for Sale or Lease $1500/Mo. Rooms 4-8 people 12-15 parking space 810 S. Baird, Midland, TX Contact (432) 556-4339 Several excellent oil and gas prospects. Can turnkey. 580-313-0448 anytime. Several excellent Oil and Gas prospects. can turnkey. 580 313 0448 anytime. Oil Field Equipment For Sale 2-C66's, 3-C46's, 3-118's New Electrical Motors 3,5,10HP Orbit Valves, Down Hole Pumps, Bearings, Fittings, Belts, Well Heads, (new), Packers (new) lots of miscellaneous TEX STEAM DIESEL FIRED STEAM GENERATORS • 4 40 hp tex steam, each in an enclosed trailer, each have a 300 gallon fuel tank. • 65 hp tex steam, skid mounted, with a 300 gallon fuel tank • 100 hp tex steam unit, in an enclosed trailer, 500 gallon fuel tank • 100 hp tex steam unit in an enclosed trailer, 750 gallon fuel tank • 125 hp tex steam skid mounted on gooseneck trailer 1000 gallon fuel tank • Lots of coils, parts, pump, steam hoses ect. • 8V92 TA silver 450 hp built by Stewart Stevens approximately 600 hours 900-350 Sullair compressor about 4,000 hours came off of a retro fitted Schramm Drill Rig that was rolled over asking $20,000.00 or best office no coolers or receiver tank • 750-350 Sullair Compressor with approximately 1,500 hours on a rebuild compressor only $7,500.00 or best offer. Call for pricing Roger Bollinger 830-719-3845 E-mail Kelly@bollingerdrilling.com BRIDGE PLUGS AND MILLS - Magnum Mill EZ composite bridge plugs, 4-1/2", 5-1/2", adapter kits $650+ Terminator 5-bladed mills 4-3/4", 4-5/8" $250+ (575) 687-4189 FOR SALE: Well established Oilfield service company Hot Oil and Vac Trucks 307-629-1669 BUY DIRECT FROM THE MFG: 20-2800 KW GENERATORS ALSO BUY & SELL USED , Cat, Cummins, Detroit, Volvo and others. Martin Machinery, 39425 Excelsior Dr., Latham, MO 65050 email: sales@martinmachinery.com (660) 458-7000; Fax (660) 458-7100 J & R INDUSTRIAL ENGINE SERVICE We Buy, Sell, and Rebuld Generator Sets and Power Units. Used, Rebuilt, Low Hour, New Surplus, Cores, Parts, Components Diesel and Natural Gas. Call 877-806-3946 Dhutchison@jrindustrialeng.com Website www.jrindustrialengine.com NEW and USED Diesel and Natural Gas Generator Sets, low hour take-outs, and rebuilt sets sizes available in Cat, Cummins, and Detroit Diesel. Tele. 817-629-5319, E-Mail: tstubbs@airmail.net Web Site: www.swenterprises.com WANTED: CATERPILLAR / WAUKESHA GAS AND DIESEL ENGINES & GENSETS. CONTACT BILL HAMMANN @ 800-622-1388 or 210-666-3600, E-MAIL info@wmhammannint.com FOR SALE: 2 - Hot Oil Units 4 - Frac Water Heaters Call (806) 228-5512 ADVANCED SATELLITE MAPPING Before you lease or drill your prospect,get your color coded Oil & Gas Satellite Map. The map will give you an additional economical tool in evaluating your prospect. Call Larry for additional info. 405-447-5515 877-204-1192 Hardwood Lumber & Timbers All sizes available up to 30 ft long Pipe Chocks and Pipe Saddles Phillips Sawmill -Since 1958 Dekalb, TX 75559 Contact Cole @ 903-667-4151 Is your competition already advertising with us?? Check out our Website Oiltizer.com If they aren't on our Website or in our Paper beat them to it!! Call or email today for information on our early bird rates!!! 800-255-7215 or email help@oiltizeronline.com NEW TUBING 1-1/4" 2.40# J-55 10RD T&c 1-1/2" 2.76# J-55 10RD IJ 2-3/8" 4.70# J-55 8RD 2-7/8" 6.50# J-55 8RD 2-7/8" 6.50# N-80 8RD NEW CASING 4" 9.50# J-55 8RD 4" 10.90# J-55 8RD 5-1/2" 15.50# J-55 LTC 8RD 5-1/2" 17.00# J-55 LTC 8RD 5-1/2" 17.00# N-80 LTC 8RD 7" 23.00# J-55 LTC 8RD 7" 26.00# N-80 LTC 8RD 8-5/8" 24.00# J-55 STC 8RD 9-5/8" 36.00# J-55 STC 8RD USED TUBING 1" 1.80# J-55 10RD IJ 1" 1.80# J-55 CS HYD 1-1/4" 2.40# J-55 10RD NUE 1-1/4" 2.40# J-55 10RD IJ 1-1/4" J-55 LEFT HAND DRILL 1-1/2" 2.90# J-55 10RD IJ 1-1/2" 2.90# J-55 CS HYD 2-1/16" 3.25# J-55 10RD IJ 2-1/16" 3.25# N-80 CS HYD 2-1/16" 3.25# L-80 10RD IJ 2-3/8" 4.70# J-55 8RD EUE 2-3/8" 4.70# J-55 CS HYD 2-3/8" 4.70# N-80 8RD EUE 2-3/8" 5.95# P110 PH-6 2-7/8" 6.50# J-55 8RD EUE 2-7/8" 6.50# J-55 8RD 2-7/8" 6.50# J-55 CS HYD 2-7/8" 6.50# N-80 8RD EUE 2-7/8" 6.50# N-80 CS HYD 2-7/8" 7.90# N-80 PH-6 2-7/8" 7.90# P-110 PH-6 2-7/8" 8.70# P-110 PH-6 3-1/2" 9.30# J-55 8RD EUE 3-1/2" 9.30# P-110 CS HYD 3-1/2" 9.30# N-80 EUE 8RD 3-1/2" 12.95# L-80 PH-6 USED CASING 4-1/2" 11.50# J-55 LTC 4-1/2" 11.60# J-55 LTC 4-1/2" 11.60# N-80 LTC 4-1/2" 12.24# T-95 HDL FLUSH 4-1/2" 15.10# P-110 LTC 5-1/2" 15.50# J-55 8RD LTC 5-1/2" 17.00# J-55 LTC 5-1/2" 17.00# N-80 8RD LTC 5-1/2" 17.00# P-110 LTC 7" 23.00# J-55 8RD LTC 7" 23.00# J-55 8RD STC 7" 23.00# N-80 8RD LTC 7-5/8" 26.00# N-80 8RD LTC 9-5/8" 36.00# J-55 8RD BRAMMER PIPE & STEEL, INC. 6178 E. U.S. HWY 82 GAINESVILLE, TX. 76240 (940) 665-4807 ASK FOR AARON agaguthrie@gmail.com OCTG 1 ¼ 20,000' IJ J-55 D&t,Inspected YB,BB,#1,LP 30,000' EUE J-55 D&t,Inspected YB,BB,#1,LP 1 ½ 200,000' EUE J-55 D&t,Inspected YB,BB,#1,LP 30,000' NUE J-55 D&t,Inspected YB,BB,#1,LP 2 1/16 20,000' IJ J-55 D&t,Inspected YB,BB,#1,LP 2 3/8 1,500,000' EUE J-55 D&t,Inspected YB,BB,#1,LP 100,000' EUE J-55/IPC D&t,Inspected YB,BB 20,000' Hydrill J-55 D&t,Inspected YB,BB,#1,LP 20,000' Buttress J-55 D&t,Inspected YB,BB,#1,LP 75,000' EUE N-80 D&t,Inspected WB,YB 2 7/8 200,000' EUE J-55 D&t,Inspected YB,BB,#1,LP 50,000' EUE J-55/IPC D&t,Inspected YB,BB 15,000' NUE J-55 D&t,Inspected YB,BB, 20,000' Hydrill D&t,Inspected YB,BB,#1,LP For Sale: Hot Oil Trucks and Vac Trucks (307) 746-3631 Precision MachineWorks 242 County Road 1125 N. Keenes, IL 62851 Phone: 618-835-2656 ◗ CNC Turning to 35” Dia ◗ Cylindrical Grinding ◗ CNC Millwork • ◗ Reverse Engineering 1217 County Hwy 13 • Keenes, Il 62851 FOR Specializing in Churchhill, National & Oilwell Gears Gear Box Rebuilding Custom Helical & Spur Gears, Worm Gears, Sprockets, Spline Shafts Mark Steiner mark@pmwgear.com CALL FOR PRICING & AVAILABILITY (618)835-2656 2- 2018 NEW HAWKER PIPE HANDLERS, 2018 KUBOTA TIER 3 DIESEL ENGINES, DANFOSS HYD., WT. 21,500#, 8 FT. WIDTH, 47 LONG, DUEL AXLES ELECTRIC BRAKES, MOUNTED ON GOOSE NECK TRALIER, $165,000.00 EACH. CALL 740-350-4377 143 acres of 100% oil and gas rights, Elk Co., Pa. All depths. O wells. Low pressure gas line. Adjacent production. If interested, email halltonjay@gmail.com Wanted to buy 2,000 Ft of 1 inch or 1 ¼ inch Hydrill Pipe. Call John Galemore 918-629-1776 PRODUCING LEASES FOR SALE 467 acres with 6 producing wells and complete tank battery. Approx. 1 1/2 miles of buried 6,000 volt private electric line with above ground transformers. Many drill sites available. Eastern Kansas shallow wells. Contact: Jim at 614-620-3662 or 913-850-4100 for complete details. Chataqua County, Kansas Cattleman sand waterflood opportunity *Township 33 S, R 8 E, Section 15 *Chinn Lease 960 Acres *8 fully equipped Cattleman sand wells, 2,200’ deep *2 Cattleman sand injection wells, #5 MIT in October 2020, #8 due in Oct. 2021 *Fiberglass Gun Barrell 10x15, fiberglass 200 bbls salt water tank at tank site, 200 bbls salt water tank at #5 injection well, completely rebuilt triplex injection pump, 3-200 bbl stock *tanks, 1 fiberglass the other 2 steel. *3 fully equipped oil wells on gas, haven’t run in a long time. *1 completely equipped source well, hasn’t run in 20 years. *4 equipped & serviced cattleman sand wells on electric, sold 266,000 BO since drilled *Needs source well started up and a well-designed water flood put in place. *Selling due to age and health reasons. *Inquiries: Victory Minerals LLC, PO Box 414830, Kansas City, Kansas 64141 *Carmon Decker Bonanno (PH) 816-223-3712 (FX) 816-321-2378 (email)carmonbonanno@hotmail.com We are FAST CASH MONEY buyers of all sizes and grades of tubing, casing and rods. Any condition. Pipe and Sucker Rod Sourcing. CALL NOW 844-304-3211 49 Acre Real Estate development opportunity in the Animas Valley north of Durango, Colorado. Already Zoned for RV Resort/Storage. Pat Palmer 970-946-5920 1" sucker rods $2.75' (2,075') 1" fiberglass rods $2.75' (2,490') 10 sinker bars $75 each. 7/8" rods $1.85' (3,650') 3/4" rods $1.65' (7,450') 5/8 rods $1.40' (1,850') 25,000 oilwell brand pump jack mint condition $2,600 casing, tubing and rod elevators, links misc tools and equipment. Ray 918-381-0288 0r 918-230-3111

26 July 1st, 2022 OILTIZER® The Equipment Network 800-255-7215 PIPE - OCTG continued PRODUCTION PUMPS continued PUMPS continued SWD Pumps in Inventory National - Q-300, J-250, J-165, J-150, J-100, J-30. Oilwell-548, 536, A-346, A-336, P-346, P-336, A-334, C-523, C323, A-322. Gardner Denver – QAF, TA-5, TEE, PE-5, TA-4, TA-4, TA-3, PW-3, PQ-2, Wheatley – HP-250, HP-160, HP-125, 5P-323, P-323, P-200, P-100. P-50. Gaso – 3775, 3600, 3581, T-101, 3466, 3364. 30HP to 630HP. Ajax, Union, Aplex, FMC, Weatherford, Etc. Basin Machine & Mfg. Co., Inc. 501 Hillcrest, Odessa, TX 79761 432-332-0338 bmandm@basinmachine.com Cook's Engines Service, Inc. (432) 337-1975 www.cooksengine.com National J-60 Steel & A/B Fluid End (2) National J-60 w/’’L’’ A/B FLUID END COMPLETE PACKAGES (1)200T W/ ‘’M’’ FLUID END COMPLETE PACKAGE (9)J-165 NATIONAL “M” W/ A/B FLUID END COMPLETE PACKAGE (1) J-165 NATIONAL W/ ‘’L’’ FLUID END COMPLETE PACKAGE National J-30 A/B w/20 HP Motor (2)National J-100 w/A/B Fluid End "H" (1)National (NEW) J-165 w/"M","H","L" A/B Fluid End (1)National J-275 w/A/B Fluid End Bethlehem TP-4 A/B w/60 HP Motor Bethlehem TP-6 Steel & A/B Bethlehem B-150 A/B (4)Bethlehem TP-3 (2)Oilwell 348 Power Frame (1)Oilwell 368 w/A/B Fluid End (2)Oilwell 336-P PACKAGES (1)Oilwell A-348-5 Triplex Pump Package w/Elec. Mtr. (1)Oilmaster J-60 A/B w/75 HP Mtr. (1)Gardner Denver TA-4 w/A/B Fluid End (1)Gardner Denver PQ-2 (1)Gardner Denver PW-3 (2)Gardner Denver TA-3 COMPLETE PACKAGES (1)TA-5 GARDNER DENVER PUMP PACKAGE (1)Gaso 3364 Skid Mounted w/Elec. Mtr. (1)Gaso 3582 "L" Pump Package w/3" PL & A/B Fluid End (1)Gaso 3581 pump package w/electric mtr. ACRES OF PUMPING UNITS, PARTS, GEARS, AND GEARBOXES Specializing in hard to find parts. Name Brand Units - 16's to 640's. New and rebuilt gearboxes, new and used gears, cranks, weights, wrist pins, saddle and tail bearings. Will Deliver. BUY, SELL, OR TRADE Harrelson Equipment 800-243-2522 or 940-636-1984 TX 29,000' of 1-1/4" fiberflex rods & subs 12,500' of 1" fiberflex rods & subs Brammer Pipe & Steel, Inc. 940-665-4807 PUMPS PUMPING UNITS PRODUCTION G-D FXN 7 1/4 x 14 mud pump, p-b 3408 Caterpillar with pump drive, belt guard, PD55 Hydril dampner and 750 gallon fuel tank, mounted on heavy duty tandem drop deck trailer with inverted 5th wheel. (Low Hours) Located in North Texas (940)781-9254 1 Lufkin A18240-420-192” Serial #8 $25,000 1 Lufkin A912-470-240” Serial #F879160-446701 $25,000 1 Lufkin A912-470-240” Serial #F879180-440703 $25,000 All Cylinders Rebuilt - FoB Bakersfield, CA AC Pipe & Equipment 562-427-3633 Circulating Unit Gardner Denver 6" FXG pump with 3" and 5" pistons and liners, pressure relief valve. New valves and springs. JD 4039 TF 001, 80 Hp engine. Starting system check. Manual clutch. Fifty gal.fuel tank. Twenty barrel circulating tank, hard line. Mounted on 18' Load trailer with new tires. Call 307-272-4005 20,000' Buttress D&t,Inspected YB,BB,#1,LP 50,000' EUE N-80 D&t,Inspected WB,YB 3 1/2 15,000' EUE J-55 D&t,Inspected YB,BB,#1,LP 10,000' EUE L-80/IPC D&t,Inspected YB,BB 10,000' EUE N-80 D&t,Inspected WB,YB 10,000' EUE L-80 D&t,Inspected YB,BB 4 ½ 20,000' 9.50# J-55 D&t #1,#2 150,000' 10.50# J-55 D&t #1,#2 125,000' 11.60# J-55 D&t #1,#2 80,000' 11.60# N-80 D&t,Inspected WB 5 ½ 20,000' 14# J-55 D&t #1,#2 50,000' 15.50# J-55 D&t #1,#2 100,000' 17# J-55 D&t #1,#2 85,000' 17# N-80 D&t,Inspected WB 7 5,000' 23# J-55 D&t #1,#2 10,000' 26# J-55 D&t #1,#2 5,000' 29# N-80 D&t,Inspected WB 7 5/8 20,000' 29.7# N-80 D&t,Inspected WB 8 5/8 60,000' D&t #1 9 5/8 2,000' 36.4# N-80 D&t,Inspected WB 1,200' 43.5# N-80 D&t,Inspected WB 2,000' 47# S-95 D&t,Inspected WB 5,000' 53.5# P-110 D&t,Inspected WB 3,100' 53.5# S-95 D&t,Inspected WB 3,000' 62# Q-125 D&t,Inspected WB Stuctural available in all sizes CALL PETROSMITH EQUIPMENT, LP ABILENE, TX 800-553-7473 (325) 691-1085 STEVE TARPLEY - INSIDE SALES MATT SMITH - INSIDE SALES LLOYD CHISUM - INSIDE SALES ANDY ROY - INSIDE SALES RANDY SMITH - PLUGGING, BRAD SHUGART - PURCHASING PUMPING UNITS, ALL MAKES, ALL SIZES. HUNDREDS OF HARD TO FIND WEIGHTS. ARVINE PIPE 405-364-1950. NORMAN, OK WWW.ARVINEPIPE.COM Subject: Injection Wells , Commercial Salt Water Disposal Wells. Harsh Environment We have 15,300 feet New 6 5/8” 32# HCL80 1% Chrome Vam Top HC With TK Liner by Tuboscope and TK Ring V&M Star MTRs , Full Specification of TK Liner and TK Ring supported by Tuboscope Material is used by BP and Marathon Oil Companies Please contact Michael Cohen Production Asset Recovery 817-703-5384 Or Aaron Guthrie Brammer Pipe & Steel 940-665-4807 25 ACRES OF 1" thru 13 3/8" CASING AND TUBING. ARVINE PIPE 405-364-1950 CALL ME I PAY QUICK CASH MONEY FOR SURPLUS & USED DRILL PIPE, DRILL COLLARS, HEAVY WALL TUBING & CASING, CALL & FAX INVENTORIES & PRICES TO RENE HENDON 800.281.1161 OR 281.260.0880 FAX: 281.260.0770 QTY - SIZE 5 - D10'S, 7 - D16'S, 8 - D25'S, 10 - 40'S, 9 - 57'S, 6 - 80'S, 12 - 114'S, 5 - 160'S, 13 - 228'S, 3 - 320'S, 1 - 600, 1 - 640, 1 - 900, 1 - 912 BRAMMER PIPE & STEEL, INC. 6178 E. U.S. HWY 82 GAINESVILLE, TX. 76240 (940) 665-4807 ASK FOR AARON PUMPING UNITS FOR SALE FROM SIZES 40'S TO 912'S CALL TODD COOK AT 432-557-1994 E-Mail: toddcook@cooksengineservice.com COOK'S ENGINE SERVICE, INC. 432-337-1975 BRAND NEW PUMPS IN STOCK! GD 4 x 5 Duplex Call for Price GD 4½ x 5 Duplex Call for Price GD 5 x 6 Air Drive FG-AG Call for Price GD 5 x 6 Gear Drive FG-FXG Call for Price GD 5½ x 8 Duplex Call for Price GD 7½ x 8 Duplex Call for Price GD 5½ x 10 Duplex Call for Price GD 7½ x 10 Duplex Call for Price GD 4 x 5 Tee Triplex Call for Price GD 5 x 8 PAH Triplex Call for Price GD 5½ x 5 THE Triplex Call for Price Also New Centrifugal Pumps in stock Rebuilt Pumps!!!! All sizes and brands available. Gardner Denver, Wheatley, Gaso, Oilwell, Worthington and many more. We have over 300 pumps in stock. Call for prices. New!!! HYDRAULIC GROUT PUMP $4,400.00 MUD PUMP PARTS ON SPECIAL!!! 7 1/2 X 8, 7 1/2 X 10 GD liners $450.00 3 x 5 PE5-TEE liners $177.00 4 1/2 x 8 PAH liners $291.00 4 1/2 x 8 PAH-PJ8 pistons $91.00 5 x 8 PAH-PJ8 Liners $224.00 We manufacture fluid end, gear end, obsolete and special parts. We buy and sell new, and rebuilt pumps. We rent mud pumps and diesel power units. Power units available: Detroit diesel and CAT units available. We pay cash for used and surplus pumps. We manufacture mud pump parts made in the USA Armstrong Machine Co., Inc. 800-831-4527 / 712-335-4131 Fax: 712-335-4565 E-mail: amci@armstrongmachine.com www.armstrongmachine.com CALL ME I PAY QUICK CASH MONEY FOR GARDNER DENVER DUPLEX & TRIPLEX MUD PUMP - BARE PUMPS OR WITH DIESEL POWER UNITS. RENE HENDON 800.281.1161 OR 281.260.0880 FAX: 281.260.0770 Unused Tubing 2 3/8 SealTite J55 8rd EUE 15,000' 2 7/8 J55 6.5# 8rd EUE 34,000' Unused Casing 5 1/2 20# Rg3 LTC 21,500' 7" J55 20# Rg1 LTC 1,600' 8 5/8 J55 20# Rg1 STC 1,400' 12 3/4 35# Rg1 STC 1,000' Knight Pipe and Supply Yates Center, KS 66783 Chance Knight 620-496-8226 For Sale: Lufkin Air Balance 640-D with maximum lifting capacity of 20,200 lbs. Rod Stroke is 144-120-100. Includes newer Quincy Air compressor. Please contact Eckhardt at 1-307-797-4120. GEARS and PINIONS for pumps. Highest Quality – Competitive Prices. PETOL-GEARENCH, serving the oilfield since 1927. Call 254-675-8651. Clifton, Texas. 6 Cabot 80 pumping units with 114 gear boxes and wide pipe skids. Good condition. $5000.00 each. 325-201-8922 33 Pump Jack w/118 Fairbanks Morris gas engine. Can be used for production or test. 100 Joints 2 3/8 upset test 7000 pounds. 918-652-3314 for more info. OPI 700HDL, CAT D398, 4-1/2" - 7" Piston, 8" Stroke, 65K Lb. Rod Load, 150 Max. Pump RPM, Complete package with pulsation dampener, charge pump and air clutch, $12,500, 972-897-9607 Air-Operated Double Diaphragm Pump 2-Inch LM6 Aluminum/Buna/NPT, Texas Distributor, LM6, Industrial Quality. $990 Call 832-301-3959. SS and PP available most sizes, New. Air Industrial Works - Houston, TX

800-255-7215 OILTIZER® The Equipment Network July 1st, 2022 27 5 ROYALTIES TRUCK AND TRAILERS VALVES WELL SERVICE EQUIPMENT continued Vacuum Tank Truck 2005 Sterling LT9500 20K Frt C13 Cat 13spd 46K locking rears 52K R Susp. 70 BBL. 90K miles $70K 918 798 2560. Oilfield Low-boys direct from the manufacturer. Will build to your specs. Nuttall Trailers (580) 889.3351 TANKS TRUCKING SERVICES For Sale a 0.004063% ORRI in the Hanson lease, Arikaree Field, Lincoln Co., CO. Three wells plus two undrilled locations. The lease has made 60% of the fields production. If interested please contact 303 829 3041 2014 Mack GU 713 tank truck. Allison auto trans. 150K miles. PCI 80 bbl tank, challenger vac pump, 3 gear pump, hydracell pressure pump. 1,000 psi rated. 2012 Mack GU 713 tank truck. 13 speed. 280K miles. All new rigging in 2017. PCI 80 bbl tank. Fruitland vac pump, 3 gear pump, Meyers tri plex pressure pump. 3,500 psi rated. Contact: Cullen (918) 640-1539. We Will Pay Cash for Minerals, overrides and producing royalties. Describe fully. Write: Blake Wood, Box 99130, Lubbock, TX 79499, Phone: (806) 792-5959. Want to purchase minerals and other oil/gas interests. Send details to: P.O. Box 13557, Denver, CO 80201. FWKO 4 X 10, 6 X 15. TANKS: 202 to 400 BBL STEEL STOCK TANKS. ARVINE PIPE - YOUR OILFIELD SUPERMARKET FOR PRODUCTION EQUIPMENT. 405-364-1950 NORMAN, OK WWW.ARVINEPIPE.COM 1) Cardwell Cable Tool Spudder, GM 671, Super Charger, recent Build, four speed manual transmission, 50 gal steel fuel tank, Triple Drum, 48" drill drum w 4500 ft 7/8" drill line and 9" brakes, 34" sand line drum w 4500 ft 1/2" line 7" brakes, 34" tubing drum, w 5/8" line w 7" brakes, chain, sprockets, bearing all good. Double scoping pole with ladder, make up wrenches, guide wires, 6 sheave crown. Adjustable throttle control, kill switch, oil pressure guage, temp gauge, 3 brake handle, clutch foot pedal, kick out dogs work well, two sheave traveling block. All on skid. Have many tools that go with. ie swab, jars and bit, swab tree, quick change mandrill, stems. change over, pup sub. $48,870 for package, located Wichita, KS TEXT (405)-203-1948 Rod 2) Franks 33" Double Drum, 2001 Freightliner Model F-80, 163,095 miles. C-12 Cat series 3126, single exhaust, Fuller 9 speed. Cruise, cold air, am/fm. PTO Controls in Cab, PTO Winch for pole scope out Tulsa 48, Blocks raise pole. Dual Fuel Tank, Dual Battery, Good Rubber, 50 gal hyd Tank, 5 tool boxes, Franks 33" air over grease, brakes in good shape, 7/8" tbg line, good tbg blocks, tong pressure adjustment, hydraulic outriggers, Hi-low on tubing, air slips control, master kill on draw works, airlock axles, Foster 36 w 8 ft lift ram, air backup, swing around tong rack, BJ Rod Tongs, 3/4" and 7/8" heads, many tools, swabs, extra tongs, orbits, drilling head, and more. $227,500, located in Wichita, Kansas. TEXT Rod (405)-203-1948 DCDP wants to buy your: • Used/Surplus/New Drill collars spiral/slicks • Drill pipe and casing Anywhere in the USA! Competitive Offer and buy as-is! All we need is a few pictures, tally, and Caliber OD/ID! Call or email: DCDPpipe@aol.com Tel: 832-339-7928 VAC EQUIPMENT WANTED WELL SERVICE EQUIPMENT Allison 8961/8962 Transmissions - Excess inventory - Rebuilt & Tested, Unused Qty (1) Allison Model 8961 Transmission, Part no. 6839502 Qty (1) Allison Model 8962 Transmission, Part no. 6839501 2012 - Both rebuilt and dyno tested by ATS Transmission Service, Allison Shop in Arlington, Texas.All wear parts replaced including clutches, bearings, seals, O-rings, solenoid valves, thrust washers, etc. Torque convertor rebuilt by K & L Clutch, a repair center in Fort Worth, Texas. After dyno testing, transmissions were shrink-wrapped and dry stored in heavy steel boxes, not installed since rebuild. May 2019 - Dyno tes ted again by Stewart & Stevenson Allison Repair Center in Houston. No issues, test reports attached. Price each $55,000 WANT TO BUY WORKING DRILLING OR WELL SERVICE COMPANY - COMPLETE WITH REAL ESTATE OR SURPLUS INVENTORIES, RIGS, RIG COMPONENT PARTS, BLOCK, HOOKS, ELEVATORS, HANDLING TOOLS, POWER SWIVELS, MUD PUMPS, POWER TONGS, DRILL PIPE & COLLARS. RENE HENDON 800.281.1161 OR 281.260.0880 FAX: 281.260.0770 2,000 Ft. Pulling Unit, Good Condition, Ready to Work, Must Sell, Make Offer 903-326-4851 • 1995 Volvo truck with 5500 ft. Franks draw works. Runs off truck engine. 6500 ft. rig with 12” pole and58 Foster tongs. $40,000. 325-762-2603 1988 international 70bbl Vac Truck, $12,500 OBO. Wheelie tri-plex mump $12,500 OBO, 4 1/2 packers $250 eh.918-630-6048 POWER SWIVEL PACKAGES 2.5 3.5 S-150 PUMP PACKGES: GD TEE GDTGH JWS 340 OFM 2250 DRAWWORKS COOPER LTO 550 S/D TAYLOR 350 D/D WICHTEX C-65 D/D RIGS FRANKS 1058 D/D W/ 96'-180# MAST COOPER LTO 350 D/D W/ 96'-180# MAST WICHTEX C-30 D/D W / T55-50 MAST MISC EQUIPMENT, WORKOVER TANKS, POWER TONGS, AIR SLIPS, ACCUMALTORS, CALL FOR PICTURES & PRICES @ 325-653-3433 WINCH TRUCKS 2012 T-800 Bed Truck, 18 Speed Transmission, 395 W/B 2002 W900 Gin Truck, 8 speed Double L, Browning, 365 W/B For more information please call Donn, cell phone #970-396-5481 Wanted valves & other equipment used in natural gas processing. Call Vaco, Inc 800-563-5885 or 903-881-5617 or email vacoe@aol.com Tail Rollers, Neck Rollers, Floppy Rollers, 28K-80K Pop-ups, Headache Racks with Spoolers. www.Rollersbyfalcon.com, Ph# 918-647-4433 Wichita Jr. Double drum Twin Disc air clutches Single pole 8x7x65 with Deutz 4 cly diesel. Hydraulic & Air . Mounted on 1982 Peterbilt tandem axle with 400 cummings. List of tools Price and pictures Email hom23sds@yahoo.com Cardwell double drum pulling unit, 6x32 brakes, jaw clutches, 8x10 four sheave crown, 671 detroit with 4 speed trans. No truck, needs work $3,000. Top head drive $1,000. Deep hole air slips $700 Gaso 4x6 bronze fluid end $1,500 winches and misc call 918-381-0288 3-N.O.V. 165-T-5 high press. alum. bronze fluid ends. New N.O.V. mfg. $9,500.00 ea. w/new valves, caps, & studs. 2-Wheatley HP-160, HP-250, & HP-360 alum. bronze fluid ends. New N.O.V. mfg. $9,500.00 ea. w/new valves, caps, & studs. Basin Machine & Mfg. Co., Inc. 501 Hillcrest, Odessa, TX 79761 432-332-0338 bmandm@basinmachine.com Gaso Pumps (2) 3364 Gaso Rebuilt cast ductile iron fluid ends. Used for oil service only $ 10 K each. 918 798 2560 Your ad can be here for only... $15!

RkJQdWJsaXNoZXIy NDQ1Nw==